New Arrivals

Keychain Led Light

 250.00
Name: Mini Flashlight Material: Aluminum alloy + PC LED Number: 30 Highlight COB Battery: 500 mAh lithium polymer Lighting mode:

On/Off 2 pin Self-Locking Latching Push Button Switch

 30.00
Switch type: SPST Rated power : 3A 125VAC or 1A 250VAC   Contact resistance : 50m ohm max.   Withstanding

433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch

 1,000.00
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch is controlled by an intelligent microprocessor, which can be used

12v 520w Inverter, 12v to 120v/220v Power Inverter

 2,000.00
500W 12V Inverter Specification Model 520W Input Voltage DC 12V Output Voltage* 1-Phase (L, N, G) 110V/120V AC ±5% or

12V 200 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

24V 15A SMPS 360W AC-DC Metal Power Supply

 2,200.00
Description This is the switched mode power supply (SMPS) which convert 100-250V AC to 24V DC. It can provide upto

48V 50A Lithium Battery Charger

 2,500.00
Product Specification Brand Tiger  Input Voltage 230 V Charger Type Analog Output Voltage 48 V Frequency 50 Hz Volt Ampere

12V Micro Water Suction Pump

 280.00
Features: Made of high quality material, strong, durable and non-toxic, serve you for a long time.It is great to apply

Sunshine P3005D DC Power Supply

 8,500.00
Features Intelligent control ventilation and heat dissipation 1A/5A can be switched at will, the display is more accurate Stable performance

Ceramic Capacitor Pack

 400.00
300pcs Ceramic capacitor set pack 2PF-0.1UF 30 values*10pcs Electronic Components Package capacitor  Specifications as follows: 2pF        

Development Board

Nano V3.0 ATMEGA328P micro-controller board CH340 soldered WITH CABLE

 850.00
Description: The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and

10X15cm Copper Clad Laminate One Single Side Plate FR4

 150.00
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.

ESP-32 ESP-WROOM-32 CP2102 Development Board WiFi BLE Ultra-Low Power Consumption Dual Cores ESP32 Board

 1,050.00
  This development board is an ESP32 based board with WiFi and Bluetooth.The CP2102 USB to serial converter makes it

5×7 PCB Board Protoboard Tinned Universal Breadboard Double Prototyping FR4

 150.00
Board size: 5*7CM 2.54mm standard pitch superior material, high quality fiberglass panels thickness 1.6mm.

CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module + SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX

 2,500.00
SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX+ 24 25 Series EEPROM Flash BIOS USB Programmer Module

Uno R3 SMD with CH340 USB

 1,100.00
This is the Arduino Uno R3 compatible version. In addition to all the features of the previous board, this version is optimized

UNO ATMEGA328P-PU Development Board with 30cm cable

 1,800.00
Description: The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6

MEGA2560 R3 (ATmega2560-16AU CH340G) AVR USB board Development board with 30CM USB cable

 1,800.00
Description: Mega 2560 Arduino follows Open-source principles, which means you can freely download the development environment and many associated resources.

5x7cm Copper Clad Laminate Double Side Plate FR4

 100.00
FR4 Copper Clad Plate Laminate Single Side PCB is made up of a glass fiber epoxy resin-based. One side of this

Trending Products

PH electrode E-201-C

 1,500.00
Features:Composite electrode that combined with pH glass electrode and reference electrode.3ft cable with standard BNC (Q9-type) plug, and the quality

On/Off 2 pin Self-Locking Latching Push Button Switch

 30.00
Switch type: SPST Rated power : 3A 125VAC or 1A 250VAC   Contact resistance : 50m ohm max.   Withstanding

Strong manget 130 motor carbon brush DC3V 19000RPM micro DC motor with reversed output shaft

 35.00
Technical Parameters:Rated Voltage: 3V DCRated Speed:9000Color:Siler+Red;Motor Body Diameter:27mm/1.06″;Shaft Size:10×2.0mm/0.39″x0.08″(L*D);Motor Body Length;38mm/1.46″Output Shaft: 2.0mmLength of Output Shaft: 7.5mmHeight of Motor: 25mmMotor

Uno R3 SMD with CH340 USB

 1,100.00
This is the Arduino Uno R3 compatible version. In addition to all the features of the previous board, this version is optimized

Rechargeable Lithium Polymer Battery Lipo 3.7V 2000mAh

 1,100.00
Specifications:   Model: 103450 Type: Lithium battery Capacity: 2000mAh Rechargeable: YES Charging Voltage: 4.2V Rated Voltage: 3.7V Working Temperature: -10°C~50°C

2 x 1.5V AA battery holder with cover and On/Off Switch

 70.00
The Plastic Covered AA x 2 battery holder will give a nice finishing touch to your battery-powered project. This holder

Dual USB 5V 2.4A Charge Board Micro USB Type-C 18650 Power Bank Box Charging Module with LED Screen Display

 550.00
Dual USB 5V 2.4A Charge Board Micro USB Type-C 18650 Power Bank Box Charging Module with LED Screen Display