New Arrivals

12v 520w Inverter, 12v to 120v/220v Power Inverter

 2,000.00
500W 12V Inverter Specification Model 520W Input Voltage DC 12V Output Voltage* 1-Phase (L, N, G) 110V/120V AC ±5% or

12V 200 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

24V 15A SMPS 360W AC-DC Metal Power Supply

 2,200.00
Description This is the switched mode power supply (SMPS) which convert 100-250V AC to 24V DC. It can provide upto

48V 50A Lithium Battery Charger

 2,500.00
Product Specification Brand Tiger  Input Voltage 230 V Charger Type Analog Output Voltage 48 V Frequency 50 Hz Volt Ampere

12V Micro Water Suction Pump

 280.00
Features: Made of high quality material, strong, durable and non-toxic, serve you for a long time.It is great to apply

Sunshine P3005D DC Power Supply

 8,500.00
Features Intelligent control ventilation and heat dissipation 1A/5A can be switched at will, the display is more accurate Stable performance

Ceramic Capacitor Pack

 400.00
300pcs Ceramic capacitor set pack 2PF-0.1UF 30 values*10pcs Electronic Components Package capacitor  Specifications as follows: 2pF        

Mini 3 Keys Single Color LED Controller

 300.00
12V-24V Mini 3 Keys Single Color LED Controller Brightness Dimmer for led 3528 5050 strip light Features:100% Brand new and

4 Digit 7 Segment Display

 180.00
Specifications Attribute Value Display Type 7-Segment Number of Characters 4 LED Colours Green Number of Segments 7 Dominant Wavelength 573

ATMEGA328P IC

 475.00
Specifications IC type: AVR microcontroller Core size: 8-bit Speed: up to 20MHz Number of I/O: 23 Program memory size: 32Kb

Development Board

CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module + SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX

 2,500.00
SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX+ 24 25 Series EEPROM Flash BIOS USB Programmer Module

NodeMCU ESP8266 Development Board with 0.96 Inch OLED Display

 1,500.00
Features:1.This is an ESP8266 0.96 OLED board that features all the features of a traditional ESP8266 module.2.Seamless integration with 0.96-inch

Mini Assembled Experiment Solar Car Toys Energy Car Robot Kit Set

 350.00
Solar Powered Toy DIY Educational Toys Science for Children Mini Assembled Experiment Solar Car Toys Energy Car Robot Kit Set

5×7 PCB Board Protoboard Tinned Universal Breadboard Double Prototyping FR4

 150.00
Board size: 5*7CM 2.54mm standard pitch superior material, high quality fiberglass panels thickness 1.6mm.

Arduino Nano V3.0 Solderless (Without Cable)

 750.00
Arduino Nano is a small, breadboard-friendly development board based on an ATmega 328P SMD package microcontroller and offers the same connectivity and

ESP-32 ESP-WROOM-32 CP2102 Development Board WiFi BLE Ultra-Low Power Consumption Dual Cores ESP32 Board

 1,050.00
  This development board is an ESP32 based board with WiFi and Bluetooth.The CP2102 USB to serial converter makes it

ESP32 Lite V1.0.0 for wifi Module + BLE board based ESP-32 esp 32 Rev1 4MB FLASH

 1,500.00
The WEMOS LOLIN32 Lite Board is the successor to the ESP8266. In addition to WiFi, the microcontroller also has Bluetooth and

10X15cm Copper Clad Laminate One Single Side Plate FR4

 150.00
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.

Trending Products

2*9.3MM White Plastic Pulley

 15.00
Product description:Plastic Pulley Wheel Out diameter: 9.3MM Aperture: 2MM Thickness: 4.3MM Fit 2mm shaft tightly.

CR 2025 3V Lithium Battery With 2 Solder Feet Pins

 80.00
Product parameters Model: CR2025 With Pins Dimensions:20*2.5mm Nominal voltage: 3.0V Nominal capacity: 140mAh Operating temperature: -20~+85°C Storage temperature: -20~+60°C Working

D soldering Wire

 180.00
Generally used for De-soldering PCB components. Low cost and quality desoldering wire.

NY-D01 40A Spot Welding Machine Control Board Welder Transformer Controller Board Timing Current Digital Display For Welders

 2,500.00
The control panel of the spot welding machine is a controller which is independently developed for the DIY or the

DC 5V – 36V Dual MOS LED Digital Timer Delay Relay Trigger

 550.00
0.1 seconds (min) to 999 minutes (max) continuously adjustable.This product is easy to use, many functions, but all buyers need

YF-S201 Water flow sensor flowmeter Hall flow sensor Water control sensor 1-30L/min 2.0MPa.

 600.00
Product Parameters 1, the lowest rated working voltage: DC4.5 5V-24V 2, the maximum working current: 15 mA (DC 5V) 3,

LED Chip for Lamp Bulb

Specification: Power: 7W 9W Voltage:AC220-240V(220V 230V 240V) Led Chip Model:SMD2835 Color Rendering Index:>Ra85 Color Temperature:Cold White 6000-6500K Lumen: 90lm/w Beam angle