New Arrivals

12v 520w Inverter, 12v to 120v/220v Power Inverter

 2,000.00
500W 12V Inverter Specification Model 520W Input Voltage DC 12V Output Voltage* 1-Phase (L, N, G) 110V/120V AC ±5% or

12V 200 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

24V 15A SMPS 360W AC-DC Metal Power Supply

 2,200.00
Description This is the switched mode power supply (SMPS) which convert 100-250V AC to 24V DC. It can provide upto

48V 50A Lithium Battery Charger

 2,500.00
Product Specification Brand Tiger  Input Voltage 230 V Charger Type Analog Output Voltage 48 V Frequency 50 Hz Volt Ampere

12V Micro Water Suction Pump

 280.00
Features: Made of high quality material, strong, durable and non-toxic, serve you for a long time.It is great to apply

Sunshine P3005D DC Power Supply

 8,500.00
Features Intelligent control ventilation and heat dissipation 1A/5A can be switched at will, the display is more accurate Stable performance

Ceramic Capacitor Pack

 400.00
300pcs Ceramic capacitor set pack 2PF-0.1UF 30 values*10pcs Electronic Components Package capacitor  Specifications as follows: 2pF        

Mini 3 Keys Single Color LED Controller

 300.00
12V-24V Mini 3 Keys Single Color LED Controller Brightness Dimmer for led 3528 5050 strip light Features:100% Brand new and

4 Digit 7 Segment Display

 180.00
Specifications Attribute Value Display Type 7-Segment Number of Characters 4 LED Colours Green Number of Segments 7 Dominant Wavelength 573

ATMEGA328P IC

 475.00
Specifications IC type: AVR microcontroller Core size: 8-bit Speed: up to 20MHz Number of I/O: 23 Program memory size: 32Kb

Development Board

CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module + SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX

 2,500.00
SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX+ 24 25 Series EEPROM Flash BIOS USB Programmer Module

10X15cm Copper Clad Laminate One Single Side Plate FR4

 150.00
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.

Nano V3.0 ATMEGA328P micro-controller board CH340 soldered WITH CABLE

 850.00
Description: The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and

ESP32 Lite V1.0.0 for wifi Module + BLE board based ESP-32 esp 32 Rev1 4MB FLASH

 1,500.00
The WEMOS LOLIN32 Lite Board is the successor to the ESP8266. In addition to WiFi, the microcontroller also has Bluetooth and

5x7cm Copper Clad Laminate Double Side Plate FR4

 100.00
FR4 Copper Clad Plate Laminate Single Side PCB is made up of a glass fiber epoxy resin-based. One side of this

Wireless module CH340G Node Mcu V3 Lua WIFI Internet of Things development board based ESP8266

 750.00
Description: A great set of tools to develop ESP8266. NodeMCU is built based on the mature ESP8266 technology to take

5×7 PCB Board Protoboard Tinned Universal Breadboard Double Prototyping FR4

 150.00
Board size: 5*7CM 2.54mm standard pitch superior material, high quality fiberglass panels thickness 1.6mm.

ESP-32 ESP-WROOM-32 CP2102 Development Board WiFi BLE Ultra-Low Power Consumption Dual Cores ESP32 Board

 1,050.00
  This development board is an ESP32 based board with WiFi and Bluetooth.The CP2102 USB to serial converter makes it

NodeMCU ESP8266 Development Board with 0.96 Inch OLED Display

 1,500.00
Features:1.This is an ESP8266 0.96 OLED board that features all the features of a traditional ESP8266 module.2.Seamless integration with 0.96-inch

Trending Products

18650 Rechargeable Battery 3000mah

 200.00
Features: 18650 protected rechargeable li-ion lithium battery. Suitable for laser pointer, flashlight torch and other electronics products. Safe and environmental

Kapton Tape 25M

 120.00 250.00
Polyimide adhesive tape ideal to protect contacts on the boards during the wave soldering, or other high temperature production processes.

3.7V 250mAH (Lithium Polymer) Lipo Rechargeable Battery Model SBP-502033

 300.00
3.7V 250mAH (Lithium Polymer) Lipo Rechargeable Battery Model SBP-502033 3.7V 250mAH (Lithium Polymer) Lipo Rechargeable Battery Model 502033 also known

CR2032 3V Motherboard CMOS Strip Line Lithium Battery

 110.00
Voltage 3V Battery Type CR2032 Connector Type JST-SHR-03V Pins Qty 2 Wires Qty 3 Capacity 220mAh Weight (oz) 0.1oz Cable

Uno R3 SMD with CH340 USB

 1,100.00
This is the Arduino Uno R3 compatible version. In addition to all the features of the previous board, this version is optimized

2GT Timing Pulley

 150.00
Description: The 2GT Pulley is made of aluminum alloy material, so it is sturdy, durable, anti-rust, and anti-corrosion effectively. It

MICRO USB To DIP Adapter 5pin Female Connector B Type PCB

 25.00
Micro USB Female Adapter Type B on 5-pin printed circuit board to be soldered for USB. Ideal product to deport

Focus F-99 Mini DC UPS (8000 mAh)

 2,500.00
Model: Svc mini ups 8000mah Capacity: 18W Battery: 8000mAh Input voltage : 100-240Vac Output voltage: 200-240Vac Unit Dimension (mm): 160