New Arrivals

12v 520w Inverter, 12v to 120v/220v Power Inverter

 2,000.00
500W 12V Inverter Specification Model 520W Input Voltage DC 12V Output Voltage* 1-Phase (L, N, G) 110V/120V AC ±5% or

12V 200 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

24V 15A SMPS 360W AC-DC Metal Power Supply

 2,200.00
Description This is the switched mode power supply (SMPS) which convert 100-250V AC to 24V DC. It can provide upto

48V 50A Lithium Battery Charger

 2,500.00
Product Specification Brand Tiger  Input Voltage 230 V Charger Type Analog Output Voltage 48 V Frequency 50 Hz Volt Ampere

12V Micro Water Suction Pump

 280.00
Features: Made of high quality material, strong, durable and non-toxic, serve you for a long time.It is great to apply

Sunshine P3005D DC Power Supply

 8,500.00
Features Intelligent control ventilation and heat dissipation 1A/5A can be switched at will, the display is more accurate Stable performance

Ceramic Capacitor Pack

 400.00
300pcs Ceramic capacitor set pack 2PF-0.1UF 30 values*10pcs Electronic Components Package capacitor  Specifications as follows: 2pF        

Mini 3 Keys Single Color LED Controller

 300.00
12V-24V Mini 3 Keys Single Color LED Controller Brightness Dimmer for led 3528 5050 strip light Features:100% Brand new and

4 Digit 7 Segment Display

 180.00
Specifications Attribute Value Display Type 7-Segment Number of Characters 4 LED Colours Green Number of Segments 7 Dominant Wavelength 573

ATMEGA328P IC

 475.00
Specifications IC type: AVR microcontroller Core size: 8-bit Speed: up to 20MHz Number of I/O: 23 Program memory size: 32Kb

Development Board

Arduino Nano V3.0 Solderless (Without Cable)

 750.00
Arduino Nano is a small, breadboard-friendly development board based on an ATmega 328P SMD package microcontroller and offers the same connectivity and

Nano V3.0 ATMEGA328P micro-controller board CH340 soldered WITH CABLE

 850.00
Description: The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and

Orange Pi 4 LTS 4GB LPDDR4+16GB EMMC Rockchip RK3399

 23,000.00
What’s Orange Pi 4? It’s an open-source single-board computer. It can run Android 8.1、Ubuntu 16.04、Ubuntu 18.04、Debian 9 image. It uses

CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module + SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX

 2,500.00
SOIC8 SOP8 Test Clip For EEPROM 93CXX / 25CXX / 24CXX+ 24 25 Series EEPROM Flash BIOS USB Programmer Module

5x7cm Copper Clad Laminate Double Side Plate FR4

 100.00
FR4 Copper Clad Plate Laminate Single Side PCB is made up of a glass fiber epoxy resin-based. One side of this

UNO ATMEGA328P-PU Development Board with 30cm cable

 1,800.00
Description: The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6

10X15cm Copper Clad Laminate One Single Side Plate FR4

 150.00
This Is A High Quality Single Sided Fr2 / Phenolic General Purpose PCB. It Is Used For Rapid Prototyping Design.

ESP32 Lite V1.0.0 for wifi Module + BLE board based ESP-32 esp 32 Rev1 4MB FLASH

 1,500.00
The WEMOS LOLIN32 Lite Board is the successor to the ESP8266. In addition to WiFi, the microcontroller also has Bluetooth and

Trending Products

12V 400 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

P35 Liquid Water Level Sensor Float Switch 220V

 450.00
A float switch is a type of level sensor, a device used to detect the level of liquid within a

18650 Rechargeable Battery 3000mah

 200.00
Features: 18650 protected rechargeable li-ion lithium battery. Suitable for laser pointer, flashlight torch and other electronics products. Safe and environmental

USB Printer Cable

 200.00 500.00
Product : USB Printer Cable Length : 1.5m,3m,5m Fully compatible with all usb 1.0, 1.1, and 2.0 devices Connector: USB