Home » Module » Page 18

Showing 307–320 of 320 results

XD-206 crash switch module microcontroller module robot collision sent the DuPont line

 100.00
1. Most of the front switches installed in the module are in collision, and the module outputs a non-collision low

RGB module LED module LED trichromatic color

 100.00
Plug-in full-color LED RGB trichromatic limiting resistor to prevent burnout Through the PWM adjusting three primary colors can be mixed

5V C Type PowerBank Charging Module

 100.00
USB 18650 Battery Power Bank Module Board Features: It is 18650 Mobile power bank Battery Charge, Discharge, Protection & Boost

Type C 5V 1A 18650 TP4056 Lithium Battery Charger Module

 100.00
Description: This module uses a very mature charging chip TP4056, with simple peripheral circuits, good protection performance, and high charging

3.7V 3A Lithium Li-ion BMS PCM Battery Protection Board

 50.00
High-accuracy voltage detection circuit. Terminal of the charger using high voltage device. Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit). MOS transistor can control the battery charge and discharge. Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Maximal

TTP223 Touch Key Switch Module Touch Button Capacitive Switches Self-Locking

 50.00
The TTP223 Touch Key Module is based on a touch-sensing IC (TTP223) capacitive touch switch module. A capacitive touch sensor

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

Active Buzzer 12V

 35.00
Input Voltage(Max.) : 12V Resistance: 120KΩ to 300MΩ Resonance Frequency: 2048 Hz Sound pressure(dB(A)/10cm)min.: 80 Body Size : 12 x

27 mm diameter pressure washers piezoelectric ceramic piece Piezoelectric buzzer

 30.00
-> Plastic frame, cloth cone and edge-> Black paper cup, horizontal fasten terminal, with wire-> Impedance: 8Ω-> Rated power input: