New Arrivals

Keychain Led Light

 250.00
Name: Mini Flashlight Material: Aluminum alloy + PC LED Number: 30 Highlight COB Battery: 500 mAh lithium polymer Lighting mode:

On/Off 2 pin Self-Locking Latching Push Button Switch

 30.00
Switch type: SPST Rated power : 3A 125VAC or 1A 250VAC   Contact resistance : 50m ohm max.   Withstanding

433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch

 1,000.00
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch is controlled by an intelligent microprocessor, which can be used

12v 520w Inverter, 12v to 120v/220v Power Inverter

 2,000.00
500W 12V Inverter Specification Model 520W Input Voltage DC 12V Output Voltage* 1-Phase (L, N, G) 110V/120V AC ±5% or

12V 200 RPM Centre Shaft DC Geared Motor

 350.00
Metal gears are the most resistant to wear and damage. The gearbox is completely sealed and lubricated with lithium grease,

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal

24V 15A SMPS 360W AC-DC Metal Power Supply

 2,200.00
Description This is the switched mode power supply (SMPS) which convert 100-250V AC to 24V DC. It can provide upto

48V 50A EV Battery Charger

 2,500.00
Product Specification Brand Tiger  Input Voltage 230 V Charger Type Analog Output Voltage 48 V Frequency 50 Hz Volt Ampere

12V Micro Water Suction Pump

 280.00
Features: Made of high quality material, strong, durable and non-toxic, serve you for a long time.It is great to apply

Sunshine P3005D DC Power Supply

 8,500.00
Features Intelligent control ventilation and heat dissipation 1A/5A can be switched at will, the display is more accurate Stable performance

Ceramic Capacitor Pack

 400.00
300pcs Ceramic capacitor set pack 2PF-0.1UF 30 values*10pcs Electronic Components Package capacitor  Specifications as follows: 2pF        

Development Board

UNO ATMEGA328P-PU Development Board with 30cm cable

 1,800.00
Description: The Arduino Uno R3 is an open-source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6

5x7cm Copper Clad Laminate Double Side Plate FR4

 100.00
FR4 Copper Clad Plate Laminate Single Side PCB is made up of a glass fiber epoxy resin-based. One side of this

5×7 PCB Board Protoboard Tinned Universal Breadboard Double Prototyping FR4

 150.00
Board size: 5*7CM 2.54mm standard pitch superior material, high quality fiberglass panels thickness 1.6mm.

Nano V3.0 ATMEGA328P micro-controller board CH340 soldered WITH CABLE

 850.00
Description: The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and

Wireless module CH340G Node Mcu V3 Lua WIFI Internet of Things development board based ESP8266

 750.00
Description: A great set of tools to develop ESP8266. NodeMCU is built based on the mature ESP8266 technology to take

Type-C 1.14 Inch TTGO T-Display ESP32 WiFi Module Conversion Components USB WIFI Replacement Electronic Fuse Holder

 3,500.00
Description:Color screen, low power consumption.Increase battery powered charging circuit.Added a custom button. Specification:Product name: ModuleColor: BlackChipset: ESPRESSIF-ESP32 240MHz Xtensa dual-core

Trending Products

Eye Blink Sensor

 800.00
EYE BLINK SENSOR This Eye Blink Sensor module detects eye blink using infrared. The reflected infrared radiation from the eye varies depending

2.35mm Mini Drill Chucks Set 5 In 1

 450.00
Mini Drill Chuck 7Pcs 0.5-3mm 2.35mm Shank This 0.5-3mm twist drill chuck set is made of copper with excellent workmanship.The

PAM8403 4 Channels mini Digital Audio Amplifier

 400.00
Xh-A156 digital power amplifier board, input voltage is DC5V, double audio input, can play two groups of music at the

Alligator Clip Lead Wire Crocodile Cable 50cm

 130.00
Name: Alligator Clip Wires Alligator Size: 35mm Wire Length: 50cm Connection: Double-ended crocodile/alligator clips5 Color: Red, green, yellow, white and

SG90 4.8V~6V 9g Micro Servo Motor RC for Robot Helicopter Airplane Controls 360°

 310.00
Specification: Brand new Size: approx. 21.5*11.8*22.7mm Operating Speed: 0.12second/ 60degree ( 4.8V no load) Stall Torque: 1.2kg / 42.3oz(4.8V); 1.6

Hinge Linker Plastic Small for RC Airplane Aircraft Helicopter Quadcopter

 25.00
Color: White Material: Plastic Suitable for rudder surface connection Mainly for aileron of aircraft, Quadcopter Size: 12*24mm/0.47*1.94″ Quantity: 1PCS Note:

8 Pin DIP IC Socket Base Adaptor

 10.00
8 Pin IC Socket base adaptor is an 8 pin IC holder, which can be soldered directly onto the PCB.

DIY Kit Clap Control Switch

 250.00
 Electronic Acoustic Clap Control Switch DIY Kit Sound Sensor Electronic Circuit DIY Suit Integrated PCB Module  Features: Easy to use

7 Segment Display

 40.00
The 7 segment led display is 1 digit Led display with high intensity output. It is used for displaying decimal